PaperYodha

Prepare

Mock TestsLive TestsPrevious Year PapersPractice
PaperYodha
Previous Year Papers· Real papers, shift-wise

PaperYodha

One platform for SSC, Defence and Engineering entrance exams: mocks in each exam's official pattern, weekly all-India live tests, real previous-year papers and topic-wise practice.

Coming soon: IBPS PO · SBI Clerk · MPPSC · CAT

SSC

  • SSC CGL
  • SSC CHSL
  • SSC MTS
  • SSC GD Constable

Defence & Engineering

  • NDA
  • JEE Main
  • JEE Advanced

Platform

  • Mock tests
  • Live tests
  • Previous year papers
  • Practice

AboutContactPrivacy noticeTerms of usePricingRefunds & cancellationYour data

PaperYodha is an independent preparation platform and is not affiliated with the Staff Selection Commission, UPSC, the National Testing Agency or the IITs. Mock questions are original. Exam patterns are taken from published sources; always confirm details in the official notification.

MocksLivePYQsPractice
Mock TestsLive TestsPrevious Year PapersPractice
MocksLivePYQsPractice
← JEE Main topics

Other Chemistry · JEE Main previous year questions

650 questions asked across 20 exam years, newest first

Other Chemistry has appeared 650 times in JEE Main papers between 2002 and 2026, about 4.7 questions per paper, from 25 per paper in 2002 to 2.6 per paper in 2026. Every question is listed below with its answer and the paper it came from. Use Practise this topic to attempt them as a timed set.

Year-wise papersTopic-wise questions
Practise this topic
All years 6502026 442025 342024 852023 962022 742021 582020 542019 552018 142017 142016 92015 62014 62012 282010 72009 52006 92005 132004 142002 25

2019 55 questions

  1. Q732019 · 12 Apr 2019 · Shift 2

    NO2​ required for a reaction is produced by the decomposition of N2​O5​ in CCl4​ as per the equation, 2N2​O5​(g)→4NO2​(g)+O2​(g). The initial concentration of N2​O5​ is 3.00 mol L−1 and it is 2.75 mol L−1 after 30 minutes. The rate of formation of NO2​ is :

    1. A.2.083×10−3 mol L−1 min−1
    2. B.8.333×10−3 mol L−1 min−1
    3. C.4.167×10−3 mol L−1 min−1
    4. D.1.667×10−2 mol L−1 min−1
    Show answer

    Answer: D

  2. Q782019 · 12 Apr 2019 · Shift 2

    The compound used in the treatment of lead poisoning is :

    1. A.desferrioxime B
    2. B.Cis-platin
    3. C.D-penicillamine
    4. D.EDTA
    Show answer

    Answer: D

  3. Q862019 · 12 Apr 2019 · Shift 2

    The INCORRECT statement is :

    1. A.Lithium is least reactive with water among the alkali metals
    2. B.LiCl crystallises from aqueous solution as LiCl⋅2H2​O
    3. C.Lithium is the strongest reducing agent among the alkali metals
    4. D.LiNO3​ decomposes on heating to give LiNO2​ and O2​
    Show answer

    Answer: D

  4. Q872019 · 12 Apr 2019 · Shift 2

    The correct statement is :

    1. A.leaching of bauxite using concentrated NaOH solution gives sodium aluminate and sodium silicate
    2. B.the Hall-Heroult process is used for the production of aluminium and iron
    3. C.pig iron is obtained from cast iron
    4. D.the blistered appearance of copper during the metallurgical process is due to the evolution of CO2​
    Show answer

    Answer: A

  5. Q902019 · 12 Apr 2019 · Shift 2

    The temporary hardness of a water sample is due to compound X. Boiling this sample converts X to compound Y. X and Y, respectively, are :

    1. A.Mg(HCO3​)2​ and MgCO3​
    2. B.Ca(HO3​)2​ and CaO
    3. C.Ca(HCO3​)2​ and Ca(OH)2​
    4. D.Mg(HCO3​)2​ and Mg(OH)2​
    Show answer

    Answer: D

  6. Q622019 · 10 Apr 2019 · Shift 1

    Amylopectin is compound of :

    1. A.α-D-glucose, C1​−C4​ and C1​−C6​ linkages
    2. B.β-D-glucose, C1​−C4​ and C2​−C6​ linkages
    3. C.β-D-glucose, C1​−C4​ and C1​−C6​ linkages
    4. D.α-D-glucose, C1​−C4​ and C2​−C6​ linkages
    Show answer

    Answer: A

  7. Q742019 · 10 Apr 2019 · Shift 1

    At room temperature, a dilute solution of urea is prepared by dissolving 0.60 g of urea in 360 g of water. If the vapour pressure of pure water at this temperature is 35 mm Hg, lowering of vapour pressure will be. (molar mass of urea = 60 g mol−1)

    1. A.0.031 mmHg
    2. B.0.017 mmHg
    3. C.0.028 mmHg
    4. D.0.027 mmHg
    Show answer

    Answer: B

  8. Q812019 · 10 Apr 2019 · Shift 1
    Chemistry question 21 as printed in the paper
    1. A.3s orbital
    2. B.2s orbital
    3. C.2p orbital
    4. D.1s orbital
    Show answer

    Answer: B

  9. Q832019 · 10 Apr 2019 · Shift 1

    The regions of the atmosphere, where clouds form and where we live, respectively, are :

    1. A.Stratosphere and Stratosphere
    2. B.Stratosphere and Troposphere
    3. C.Troposphere and Stratosphere
    4. D.Troposphere and Troposphere
    Show answer

    Answer: D

  10. Q852019 · 10 Apr 2019 · Shift 1

    The correct order of catenation is :

    1. A.C>Sn>Si≈Ge
    2. B.Si>Sn>C>Ge
    3. C.C>Si>Ge≈Sn
    4. D.Ge>Sn>Si>C
    Show answer

    Answer: C

  11. Q862019 · 10 Apr 2019 · Shift 1

    The alloy used in the construction of aircrafts is :

    1. A.Mg – Zn
    2. B.Mg – Al
    3. C.Mg – Mn
    4. D.Mg – Sn
    Show answer

    Answer: B

  12. Q682019 · 10 Apr 2019 · Shift 2

    The INCORRECT statement is :

    1. A.the color of [CoCl(NH3​)5​]2+ is violet as it absorbs the yellow light.
    2. B.the gemstone, ruby, has Cr3+ ions occupying the octahedral sites of beryl.
    3. C.the spin-only magnetic moment of [Ni(NH3​)4​(H2​O)2​]2+ is 2.83 BM.
    4. D.the spin-only magnetic moments of [Fe(H2​O)6​]2+ and [Cr(H2​O)6​]2+ are nearly similar.
    Show answer

    Answer: B

  13. Q762019 · 10 Apr 2019 · Shift 2

    The minimum amount of O2​(g) consumed per gram of reactant is for the reaction : (Given atomic mass : Fe = 56, O = 16, Mg = 24, P = 31, C = 12, H = 1)

    1. A.4Fe(s)+3O2​(g)→2Fe2​O3​(s)
    2. B.P4​(s)+5O2​(g)→P4​O10​(s)
    3. C.C3​H8​(g)+5O2​(g)→3CO2​(g)+4H2​O(l)
    4. D.2Mg(s)+O2​(g)→2MgO(s)
    Show answer

    Answer: A

  14. Q832019 · 10 Apr 2019 · Shift 2

    The correct statement is :

    1. A.zincite is a carbonate ore.
    2. B.Sodium cyanide cannot be used in the metallurgy of silver.
    3. C.aniline is a froth stabilizer.
    4. D.zone refining process is used for the refining of titanium.
    Show answer

    Answer: C

  15. Q842019 · 10 Apr 2019 · Shift 2

    The correct option among the following is :

    1. A.Addition of alum to water makes it unfit for drinking.
    2. B.Colloidal medicines are more effective because they have small surface area.
    3. C.Colloidal particles in lyophobic sols can be precipitated by electrophoresis.
    4. D.Brownian motion in colloidal solution is faster if the viscosity of the solution is very high.
    Show answer

    Answer: C

  16. Q852019 · 10 Apr 2019 · Shift 2
    Chemistry question 25 as printed in the paper
    1. A.Vmp​ of O2​ (400 K); Vmp​ of N2​ (300 K); Vmp​ of H2​ (300 K)
    2. B.Vmp​ of N2​ (300 K); Vmp​ of H2​ (300 K); Vmp​ of O2​ (400 K)
    3. C.Vmp​ of H2​ (300 K); Vmp​ of N2​ (300 K); Vmp​ of O2​ (400 K)
    4. D.Vmp​ of N2​ (300 K); Vmp​ of O2​ (400 K); Vmp​ of H2​ (300 K)
    Show answer

    Answer: D

  17. Q872019 · 10 Apr 2019 · Shift 2

    A hydrated solid X on heating initially gives a monohydrated compound Y. Y upon heating above 373 K leads to an anhydrous white powder Z. X and Z, respectively, are :

    1. A.Baking soda and dead burnt plaster.
    2. B.Washing soda and soda ash
    3. C.Washing soda and dead burnt plaster.
    4. D.Baking soda and soda ash.
    Show answer

    Answer: B

  18. Q682019 · 9 Apr 2019 · Shift 1

    The given plots represent the variation of the concentration of a reactant R with time for two different reactions (i) and (ii). The respective orders of the reactions are : (i) ln[R] vs time: straight line with negative slope (ii) [R] vs time: straight line with negative slope

    1. A.0,1
    2. B.1,0
    3. C.0,2
    4. D.1,1
    Show answer

    Answer: B

  19. Q722019 · 9 Apr 2019 · Shift 1

    Among the following, the set of parameters that represents path function, is : (A) q + w (B) q (C) w (D) H−TS

    1. A.(B) and (C)
    2. B.(A) and (D)
    3. C.(B), (C) and (D)
    4. D.(A), (B) and (C)
    Show answer

    Answer: A

  20. Q812019 · 9 Apr 2019 · Shift 1

    For any given series of spectral lines of atomic hydrogen, let Δvˉ=Δvˉmax​−Δvˉmin​ be the difference in maximum and minimum frequencies in cm−1. The ratio ΔvˉBalmer​ΔvˉLyman​​ is :

    1. A.9 : 4
    2. B.4 : 1
    3. C.27 : 5
    4. D.5 : 4
    Show answer

    Answer: A

  21. Q832019 · 9 Apr 2019 · Shift 1

    Excessive release of CO2​ into the atomosphere results in :

    1. A.depletion of ozone
    2. B.polar vortex
    3. C.global warming
    4. D.formation of smog
    Show answer

    Answer: C

  22. Q892019 · 9 Apr 2019 · Shift 1

    Magnisium powder burns in air to give :

    1. A.MgO and Mg3​N2​
    2. B.MgO only
    3. C.Mg(NO3​)2​ and Mg3​N2​
    4. D.MgO and Mg(NO3​)2​
    Show answer

    Answer: A

  23. Q832019 · 9 Apr 2019 · Shift 2

    The amorphous form of silica is :

    1. A.kieselguhr
    2. B.quartz
    3. C.tridymite
    4. D.cristobalite
    Show answer

    Answer: A

  24. Q882019 · 9 Apr 2019 · Shift 2

    Noradrenaline is a/an

    1. A.Antacid
    2. B.Antihistamine
    3. C.Neurotransmitter
    4. D.Antidepressant
    Show answer

    Answer: C

  25. Q892019 · 9 Apr 2019 · Shift 2

    The layer of atmosphere between 10 km to 50 km above the sea level is called as :

    1. A.mesosphere
    2. B.thermosphere
    3. C.troposphere
    4. D.stratosphere
    Show answer

    Answer: D

More Chemistry topics in JEE Main

  • Chemical & Ionic Equilibrium (277)
  • Organic Reactions & Conversions (262)
  • General Organic Chemistry & Isomerism (235)
  • p-Block Elements (193)
  • Mole Concept & Stoichiometry (179)
  • Atomic Structure (177)
  • Chemical Bonding (174)
  • Coordination Compounds (169)
← PreviousPage 19 of 26Next →